Custom Mylar Bags for Electronics
Opaque, moisture-blocking pouches that turn a bag of parts into a product — the kit, the cable, the card, with your brand on the front and the contents listed on the back.
Every bag comes with
- Full color printing, front and back
- Metallized high-barrier film
- Optional resealable zipper with tear notch
- Gloss lamination
Have custom requirements?
Request a Quote →Every bag comes with
- Full color printing, front and back
- Metallized high-barrier film
- Optional resealable zipper with tear notch
- Gloss lamination
Have custom requirements?
Request a Quote →Select a size
Select a quantity
Ships free
What's on a custom parts pouch
Optional extras
Contact us for a custom quote
Matte or soft-touch finish
Velvet feel, no glare under lights
Spot UV
Gloss varnish over chosen areas only
Metal effects
Bare metallized film showing through the ink
Window cutout
Clear panel that shows the product
Hang hole
Euro slot for peg display
Tell us what you're picturing and we'll price it.
Our press floor, Oak Park, Michigan
We print it. Nobody in between.
Most electronics packaging is brokered — you buy from a company that buys from a factory it has never walked into. Your bags are printed on our own presses, by the people who set up your artwork.
- Our own presses
- Oak Park, Michigan
- Food-safe
- SQF certified audited
- Turnaround
- 7–10 business days from approval
- Minimum
- 500 bags
Why Brands Choose Brand My Bags for Electronics Packaging
Six things a electronics brand can check before it spends a dollar with us.
<0.02 g
Moisture out, so contacts stay cleanHumidity is what corrodes a contact and swells a board's laminate in a warehouse or a mailbox. Film under 0.02 g/100in²/day keeps the interior dry from your bench to the customer's.
Puncture-resistant
A pin-legged part doesn't get throughLaminated mylar resists the tears and punctures thin poly doesn't, so a header strip or a screw kit arrives in the bag it left in. The heat seal is tamper-evident in the plain sense: it can't be opened without tearing.
Both sides
The parts list, printed on the pouchA component kit needs a contents list, a part number and a QR to the datasheet. Edge-to-edge print on both sides puts all of it on the bag at a readable size instead of a label that peels off.
Oak Park, Michigan
We own the pressesYour bags are printed on our own equipment in Oak Park, Michigan. Most "manufacturers" in this category are brokers reselling an overseas run — there is nobody between your file and our press.
500 bags
500 bags, not 5,000Most converters will not quote a parts seller under 5,000 units. Quick Order starts at 500, with no plate fee and no setup fee, so a new SKU costs a few hundred dollars to test instead of a few thousand.
7–10 days
Printed and shipped freeProduction runs 7–10 business days from the day you approve the proof, and shipping anywhere in the US is free — quoted in the price you saw, not added at checkout.
Packaging more than one product? See all our custom mylar bags, or go straight to low-minimum mylar bags and fast-turnaround mylar bags.
Electronics packaging questions
Are these anti-static or ESD bags?
No — this is metallized barrier film, not a certified static-shielding or dissipative bag. It's right for kits, cables, cards and accessories; for ESD-sensitive bare components that need a bag to a standard, use a certified shielding bag inside it or instead of it.
Which size fits a circuit board?
The 5" × 7" flat pouch takes most modules and boards up to about 4" × 6", with cables and adapters alongside.
The 3.5″×5″ flat suits cards, chips and screw packs; the 4″×6″×2″ stand-up an adapter or small accessory kit; the 6″×9″×3″ a multi-part kit.
Will the bag protect parts from moisture?
Yes — metallized film holds moisture under 0.02 g/100in²/day and is fully opaque, which covers corrosion and UV on a part that sits in stock.
Can I print a different pouch per kit or SKU?
Yes — each design is its own run from 500 bags with no plate or setup fees, so a per-kit pouch costs a few hundred dollars, not a few thousand.
What is the minimum order for custom parts pouches?
500 bags on every size — most converters will not quote a parts seller under 5,000 per run.
Every size, from the smallest flat pouch to the 8" × 12" × 4", starts at 500 bags — a tenth of the run most converters ask for, which is what makes testing a new SKU possible without committing to a run you have never sold a unit of.
How long does custom parts pouches take?
About 7–10 business days from the day you approve your proof, because every bag is printed in-house in Oak Park, Michigan.
From file to
front door.
