

For the snack brand with more than one SKU. High-barrier film for anything crunchy, salty or mixed keeps the moisture out and the oxygen off the oils, and every flavor gets its own printed bag from 500, so a new one can test before it earns a pallet.
Every bag comes with
Have custom requirements?
Request a Quote →Every bag comes with
Have custom requirements?
Request a Quote →
Contact us for a custom quote

Matte or soft-touch finish
Velvet feel, no glare under lights

Spot UV
Gloss varnish over chosen areas only

Metal effects
Bare metallized film showing through the ink

Window cutout
Clear panel that shows the product

Hang hole
Euro slot for peg display
Tell us what you're picturing and we'll price it.

Our press floor, Oak Park, Michigan
Most snack packaging is brokered — you buy from a company that buys from a factory it has never walked into. Your bags are printed on our own presses, by the people who set up your artwork.
Six things a snacks brand can check before it spends a dollar with us.
<0.02 g
Crunch that lasts the bagEvery dry snack fails the same way first: it takes on moisture and goes soft. Metallized film under 0.02 g/100in²/day keeps humidity out across every opening, which is what a resealable bag is for.
<0.1 cc
Oils that don't turnNuts, seeds, and anything fried or roasted carry oil that goes rancid on contact with air. Film under 0.1 cc/100in²/day keeps oxygen out for the full shelf life — the flavor at the end of the bag is the flavor at the start.
6 pages
Sized for your snack, not "a snack"A pound of trail mix and a pound of puffs are not the same bag. Chips, popcorn, nuts, granola, bars and seeds each have their own page here with sizes calibrated to that product's density — this page is where the rest start.
Oak Park, Michigan
We own the pressesYour bags are printed on our own equipment in Oak Park, Michigan. Most "manufacturers" in this category are brokers reselling an overseas run — there is nobody between your file and our press.
500 bags
500 bags, not 5,000Most converters will not quote a snack brand under 5,000 units. Quick Order starts at 500, with no plate fee and no setup fee, so a new SKU costs a few hundred dollars to test instead of a few thousand.
7–10 days
Printed and shipped freeProduction runs 7–10 business days from the day you approve the proof, and shipping anywhere in the US is free — quoted in the price you saw, not added at checkout.
Packaging more than one product? See all our custom mylar bags, or go straight to low-minimum mylar bags and fast-turnaround mylar bags.
A 5" × 8" × 2.5" stand-up pouch — trail mix is medium density, so the middle size here carries an 8 oz retail bag with room to stand.
The 4″×6″×2″ suits a 4 oz single-serve and the 6″×9″×3″ a 1 lb family bag. Lighter snacks — puffs, pretzels — hold less weight in the same bag; see the chips and popcorn pages for how light products are sized.
If it's chips, popcorn, nuts, granola, bars or seeds, use that page — the sizes there are calibrated to that product; for anything else, this page's sizes are the right starting point.
Yes — metallized high-barrier film holds moisture under 0.02 g/100in²/day and oxygen under 0.1 cc/100in²/day, which covers both going soft and going rancid.
Yes — the film is cleared for direct food contact and printed in an SQF-certified facility, so snacks go straight in with no inner liner.
500 bags on every size — most converters will not quote a snack brand under 5,000 per run.
Every size, from the smallest flat pouch to the 8" × 12" × 4", starts at 500 bags — a tenth of the run most converters ask for, which is what makes testing a new SKU possible without committing to a run you have never sold a unit of.
About 7–10 business days from the day you approve your proof, because every bag is printed in-house in Oak Park, Michigan.
